OUR STANDARD PAD (250 lbs.) CAN BE ORDERED IN MOST ANY SIZE. MULTIPLE PADS CAN BE INSTALLED SIDE BY SIDE FOR LARGER GENERATORS (OR OTHER HEAVY ITEMS), OR STACKED FOR HEAVIER LOADS.
OUR NEW LIGHTWEIGHT OVAL PAD FOR AIR-COOLED GENERATORS IS PRE-DRILLED FOR EASY MOUNTING. THE OVAL DESIGN BLENDS WELL WITH THE CLASSIC CONTOURS OF LARGER ESTATES. 32″ x 54″ x 4″
LIGHTWEIGHT (180 lbs.) OVAL or RECTANGULAR PAD for AIR-COOLED GENERATORS FEATURES BEVELED EDGES, CHAMFERED EDGES and/or CUSTOM TEXTURES to MATCH ANY BUILDING’S DECOR. COSTS LESS TO SHIP THAN OUR STANDARD PAD. CALL 772-971-1958 FOR SPECIAL PRICING!
AMERICAST “MONSTER PAD” 14’ X 5’ X 4’
SUPPORTS 150 KW KOHLER MIAMI FLOOD PLAIN
GC QUOTE: $5400
AMERICAST: $4,000 (Includes Delivery & Engineering Miami-Dade Code Approved!)
PAD WILL NOW BE FINISHED WITH STUCCO (SEE PAD NEXT COLUMN)
KOHLER MIAMI FLOOD PLAIN PAD, FINISHED IN STUCCO. CUSTOM COLORS AVAILABLE TO MATCH THE NEEDS OF CUSTOMERS AND INSTALLATION SPECIALISTS.
Your Generator, Our Pad.
One trip to the job site and your job is done.
Installs in minutes by two men at a fraction
of the cost and time of pouring in place.
There is nothing better than a concrete pad poured in place. AmeriCast pads are poured in place at our place and delivered to your place. Homeowners prefer our broom finish because it matches the masonry of their homes.
AmeriCast pads are hand-poured and hand-finished (Portland 5,000 PSI) by our in-house stonemasons who have more than 50 years combined experience in the Bricklayers and Allied Craftworkers Union, New York.
Proudly made in America, the AmeriCast Pad is cutting-edge technology. Fasteners drill through 2 inches of solid Portland cement (5,000 PSI), then .5 inch of Honeycombed Polycarbonate (pull strength per fastener = 451 lbs. — our engineering and mounting kit provides four fasteners per pad). Wind load=186 MPH per Miami-Dade Code (6th Edition 2017).
WATCH THIS 40-SECOND PAD STRENGTH & MOUNTING VIDEO
AMERICAST HEAVY-DUTY SINGLE PAD BEING UNLOADED FOR CLIENT WITH KOHLER 350 KW GENERATOR
PADS ALSO AVAILABLE FOR
Onan, Kohler, Caterpillar,
Cummins, General Motors,
Briggs & Stratton, John Deere,
Katolight, Mitsubishi, Perkins
GENERATOR PAD with CUT-OUT/STUB OUT PER YOUR SPECS
AMERICAST ENGINEERING: THE SCIENCE INSIDE THE PAD
Americast Pads are reinforced with Road Mesh as well as Rebar
Road Mesh (also known as Mesh Track) is a double-twisting galvanized grid of steel wire with a reinforcing rod. The grid is made of steel wire with a double torsion grid and a mesh size of 60×80 mm, 80×100 mm, 100×120 mm, 120×150 mm. The woven mesh wire diameter is 2.0 mm-4.0 mm, and the reinforcement wire diameter is 4.0 mm-5.0 mm. The transverse rod is woven into the net every 16 cm.
AmeriCast Generator Pads: Guaranteed for the Life of Your Generator!
CUSTOM COMPANY LOGO GENERATOR PADS
NOW YOU CAN PERSONALIZE GENERATOR PADS WITH YOUR COMPANY LOGO PROMINENTLY DISPLAYED!
Cost: $250 for one-time setup. $12 per logo, per pad.
TO ORDER, CALL or E-MAIL CHARLES PITT at
Tel: 772-971-1958 ~ e-mail: sales@AmeriCastPad.com
REFERENCES/CLIENT LIST AVAILABLE ON REQUEST TO QUALIFIED DEALER/DISTRIBUTORS
Not only “Made in America” but Made Locally in Fort Pierce, Florida!
Americast pads are hand crafted and finished by our in-house Stone Mason
(23 year Member of Bricklayers & Allied Craftworkers Local 5 NY)
3204 Ohio Ave., Fort Pierce, FL 34947
Tel: 772-971-1958 Fax: 772-464-0509
FED TAX #20-8252362 LICENSE #5999-20050163